Humidification in Composites, Carbon Fibres and Plastics Manufacturing

Q: What humidity level is ideal for working with composites?

Most composite manufacturing environments perform best at 40–60 % relative humidity. This range minimizes moisture-related defects and keeps hygroscopic materials dimensionally stable.

Q: What types of humidification systems are suitable for composites?

Both direct-room and in-duct systems are effective. Steam or evaporative technologies can be used depending on facility layout, air handling design, retrofit needs, and hygiene requirements.

Q: Why is humidity control important in composite manufacturing?

Controlled humidity prevents warping, cracking, and curing defects in composite materials. It ensures consistent strength, stability, and quality while reducing waste and production downtime.

Q: Can humidifiers reduce static and dust in production areas?

Yes. Proper humidity significantly lowers electrostatic discharge and airborne dust, helping maintain clean, safe conditions and preventing surface contamination during composite processing. The minimum threshold for static control is 45% RH.

Q: How can humidification systems stay hygienic and low-maintenance?

Condair systems include advanced water treatment and self-flush functions to prevent scale and microbial growth, ensuring hygienic, reliable operation with minimal service demands.

Q: How does humidification improve product quality?

Stable humidity ensures even curing, proper resin bonding, and uniform coatings. The result is fewer rejects, improved dimensional accuracy, and a higher-quality finished composite product.

Find your Condair Expert

Benefits

Composite applications such as creating carbon fiber or similar materials require absolute humidity control to guarantee manufacturing processes that enable for consistent quality and durability.

Better quality control

Maintaining RH in range ensures consistent coatings, avoiding defects in composites.

Stable processes

Humidity control ensures quality, saves energy, prevents static and supports composite production.

Hygienic reliability

Proper humidity helps reduce material and product waste in composite manufacturing.

Humidification in composites, carbon fibres and plastics manufacturing

Top of page Benefits Use cases References Testimonials FAQs

Hygienic, low-maintenance humidification systems

Designed for demanding industrial environments, Condair’s humidification and dehumidification systems combine reliability with low maintenance and hygienic operation. Advanced water treatment options, including reverse osmosis pre-filtration, prevent scale formation and mineral build-up that can reduce performance over time. This extends equipment life, lowers energy consumption and minimises service requirements. The hygienic design, combined with automatic flush and drain functions, reduces the risk of microbial growth and ensures consistently clean, safe operation. In composite manufacturing, where surface cleanliness, material integrity and consistent curing are critical, these features provide reliable humidity control that fully complies with strict hygiene and quality standards. The result is a durable, energy-efficient solution that supports continuous production and long-term operational stability.

Precise humidity control for composite quality

Maintaining precise humidity control through both humidification and dehumidification, is essential to achieving consistent quality in composite manufacturing. Condair’s humidity control systems stabilise the environment within the optimal 40–60% RH range, protecting composite materials from warping, surface cracking, or irregular curing. Balanced humidity ensures that resins and fibres maintain their designed properties, while adhesives bond uniformly and coatings cure evenly. The result is improved dimensional accuracy, maintains structural strenght, reduced rejection rates, and reliable mechanical performance across every production batch. By managing humidity in both directions, Condair’s solutions provide a stable and predictable environment that supports the demanding standards of modern composite production, while also enhancing energy efficiency, reducing maintenance requirements, and ensuring consistent output under varying seasonal and operational conditions.

Stable processes that reduce waste and downtime

Fluctuations in humidity directly affect the behaviour of composite materials, often causing defects, delamination and unnecessary waste. Condair’s humidity control systems maintain stable environmental conditions that significantly reduce scrap and rework while ensuring smooth and consistent curing and drying cycles. By keeping moisture levels within the optimal range, the manufacturing process becomes more predictable, shortening cycle times and increasing throughput without compromising quality. Consistent humidity also helps prevent the build-up of static electricity and reduces airborne dust, minimising contamination that can interrupt production or affect surface finish. The result is an efficient and reliable operation with less waste, lower energy consumption and improved process stability. Over time, this creates measurable cost savings, enhanced product consistency and stronger sustainability performance for composite manufacturers.

Use cases

Discover Condair in action

Projects and references

Schunk Carbon Technology GmbH, Bad Goisern (Germany)

Schunk Carbon Technology is a global leader in the development and production of high-quality carbon solutions that are used for power transmission in automotive and railway technology. As part of the worldwide Schunk Group, the approximately 420 employees in Bad Goisern ensure safety and comfort in millions of motor vehicles and reliability in rail transport.

Corruven Inc.

Corruven mission is to work with industry leaders worldwide to create game-changing solutions towards building a truly sustainable future. They are a technology company specializing in the manufacture of products for the architectural and packaging markets.

Mack Molding

With its roots in custom injection molding, Mack Molding today is a leading supplier of contract manufacturing services and injection molded plastic parts to companies in a range of industries. Headquartered in Arlington, Vt., Mack Molding operates six locations throughout the eastern United States.

Quotes from our customers

Argelith Bodenkeramik H. Bitter GmbH, Bad Essen (Germany)Markus AulbertEnergy and environmental management

"Adiabatic direct room air humidification is a manageable investment with a great effect."

Mondi Group, Sonneberg (Germany)Frank DrewsTechnical Coordinator

"Humidity is very important for us to ensure standardized conditions throughout the production process."

Schunk Carbon Technology GmbH, Bad Goisern (Germany)Markus PreimesbergerEnergy management

"At the time, our employees complained of dry airways, burning eyes and skin irritation. Measurements showed a relative humidity of less than 30 percent, so we looked for ways to additionally humidify the air."